Under Cabinet Lighting Installation
No more working in your own shadow.
The ceiling lights are on, but your hands and cabinets still cast shadows across the counter. Mason Electric installs under cabinet lighting that puts useful light on the work surface, with planned wiring and controls that fit the kitchen.
- Cabinet run photos
- Backsplash photos
- Existing light photos
- Existing wiring photos
Start with the surface you use, not just the underside of a cabinet.
Preparation space, the sink-side counter, coffee station, and a dark corner below an upper cabinet can need different coverage. Useful light should reach those surfaces instead of simply making a bright strip visible.
Cabinet depth, trim, glossy counters, and viewing angle affect where the light belongs. We discuss a discreet location and assess the intended effect. The tape, channel, diffuser, and surface influence the result together.
Tell us what currently frustrates you: shadows, a dim area, mismatched color, visible cords, or a failed section. That makes the desired change clearer than a request for the brightest available light.

Choose the system around the cabinet runs.
| System | What it offers | What needs planning |
|---|---|---|
| Direct-wire bars | Self-contained fixtures | Power feed, fixed lengths and linking |
| Tape with channels | Flexible lengths and low profile | Driver, diffuser, connections and controls |
| Puck lights | Focused separate sources | Coverage and connecting paths |
| Plug-in system | Suitable receptacle connection | Visible cord route and outlet use |
The connection method is part of the choice.
Kichler’s cabinet lighting guide distinguishes plug-in, direct-wire, and tape systems. Their connections and equipment differ. We plan the installation for your kitchen rather than treating every under cabinet light as the same product.
A remodel offers different access from a fully finished kitchen. Tell us when cabinets and backsplash tile are being installed. Planning the route before the final finishes go in can avoid unnecessary rework.
Discuss the whole work surface. A single bright section is not complete coverage if another preparation area stays dark. Run lengths and gaps should be considered before fixtures are ordered.
Separate cabinets still need one coherent plan.
A window, range hood, refrigerator, or corner may interrupt the run. The cable route between visible lights needs attention too. We assess each section, the connecting path, the supply location, and how the group will be controlled.
Existing feeds, a new wiring route, driver access, and a finished backsplash influence the scope. Any drilling, wall opening, patching, or tile-related work should be identified in the estimate.
If cabinet lighting is part of a larger kitchen project, share that plan. We can coordinate the electrical portion with the sequence of cabinetry and finishing work without assuming that every surface can be reopened later.

Hide the equipment while keeping it serviceable.
Low-voltage tape commonly uses a driver that supplies the voltage specified for the tape. That equipment needs a suitable position with the access, ventilation, protection, and connections required by its instructions.
A closed finished wall is not a casual hiding place for equipment that needs service. We discuss a suitable cabinet or other approved location before finalizing the route. Not every cabinet light needs a separate remote driver; the selected system decides that.
Share any products you have already bought. An old power supply should not be reused just because a plug fits, and the driver location should not be left as the last unresolved part of the installation.

Smooth light and a control that works with the whole system.
Bright diode dots reflected in a polished counter can spoil the effect. Source position, tape design, channel depth, and diffuser affect the appearance. Share a countertop photo and tell us if reflections already bother you.
Armacost’s manufacturer guidance discusses supply and control choices. If you want an in-wall dimmer, decide that before purchasing a kit. We can assess a compatible switch or dimmer installation with the lighting.
Color appearance should be considered with the room’s other lights. The brightest setting can serve preparation work while a lower setting serves the evening kitchen. Existing fluorescent or failed LED systems may need new components rather than a like-for-like strip swap.
Run lengths, connections, controls, equipment, access, and surface work affect the estimate. Send the whole kitchen layout so separate sections and any old system are included.

Plan your under cabinet lighting installation in Atlanta Metro.
Mason Electric serves Atlanta, Alpharetta, Milton, Roswell, Duluth, Cumming, and Johns Creek. Include your service address and ZIP code so we can confirm the location and scheduling for your project. Serving Alpharetta? See our Electrician in Alpharetta page.
Questions before you schedule under cabinet lighting installation.
Practical answers to help define the work.
Can the wiring be hidden without removing cabinets?
We can assess routes through or around cabinets and nearby walls. Existing feeds, gaps, cabinetry, and the finished backsplash determine the options. Some jobs need access openings or repair.
Should I use bars or LED tape?
Bars provide a self-contained option in defined lengths. LED tape offers a low profile and flexible runs but needs a coordinated supply, connections, and mounting system. We compare them for your kitchen.
Can my current wall switch control the lights?
We assess existing wiring and the selected system. For dimming, the driver or lamps and control must be compatible; an existing dimmer is not automatically suitable.
Where will the driver go?
A suitable location needs the access, ventilation, and protection specified for the equipment. We plan it before the installation rather than finding a hiding place afterward.
Will LED dots appear in my counter?
That depends on tape construction, diffuser, placement, viewing angle, and the counter finish. A diffuser alone does not guarantee the same result in every kitchen.
Can separate cabinet runs work together?
Yes, with a suitable power and control plan. Gaps can require connecting routes that need assessment before installation.
Can you replace my old cabinet lighting?
We can review the lights, supply, control, and wiring. New tape and an old driver are not automatically compatible; replacement may involve multiple components.
Electrical requirements and planning resources
Georgia’s electrical framework uses the 2023 NEC with Georgia amendments. Check DCA’s current state codes and confirm the permit and inspection scope for the actual address. Atlanta’s technical permit service is the city’s official application and contact route. Outside Atlanta city limits, use the authority serving the property.
Discuss required approvals alongside wiring changes, equipment selection, and access before work begins. Product instructions and local requirements guide the installation; a general planning page cannot decide an exemption for every project.
Give your counter the light it has been missing.
Send cabinet and backsplash photos. Let’s plan the coverage, connections, and control.
- Cabinet lengths and photos of separate runs
- Preferred control and available power point
- Counter finish and chosen light system